Pool Calculator

Knowing how many gallons your pool holds is the starting point for almost everything else: chemical doses, salt additions, pump sizing and fill times all depend on it, and guessing wrong means cloudy water or wasted chemicals. This free pool calculator works out your pool volume from its shape and size. Pick rectangular, oval or round, enter the length and width or the diameter, add the shallow and deep end depths, and it shows the volume in cubic feet, US gallons and liters, with a comparison table for different average depths.

Pool Shape and Size

Measure the water surface, not the outside of the wall or deck. For an oval pool, enter the longest and shortest distances across the water; the oval formula treats the pool as a true ellipse.

Water Depth

Measure from the water line to the pool floor at each end, not from the top of the wall. If the pool has one constant depth, enter the same number in both boxes. The average depth is (shallow + deep) / 2, which is exact for a floor that slopes evenly from end to end.

Pool volume
Surface area
Average depth
Volume
Volume
Volume
Note: this calculator gives the water volume only. Once you know the gallons, use that figure for chemical dosing, salt additions and fill-time estimates. For a saltwater pool, the amount of salt to add depends on the gallons and the current salt level, so measure the salt level first rather than guessing.
Average DepthVolume (cubic feet)Volume (gallons)Volume (liters)

Each row uses the pool shape and size entered above, at a different average depth. Volume scales directly with average depth, so doubling the depth doubles the gallons.

Powered by Techraxy

Creator & Reviewer

Faiq Ur Rahman

Founder & CEO, Techraxy

Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.

Share:

Rate this Tool

User Ratings:

0
0 out of 5 stars (based on 0 reviews)
Excellent
Very good
Average
Poor
Terrible

ADVERTISEMENT

ADVERTISEMENT

What is a Pool Calculator?

A pool calculator turns the measurements of your pool into its water volume. The method is the same for every shape: work out the surface area of the water, multiply by the average depth to get cubic feet, then convert to gallons. One cubic foot holds 7.48052 US gallons (1,728 cubic inches in a cubic foot divided by 231 cubic inches in a gallon), so a pool of 2,944 cubic feet holds about 22,023 gallons.

The shape matters because the surface area formula changes. A rectangular pool is length times width. A round pool is pi times the radius squared, which works out to about 5.87 times the diameter squared times the depth in gallons. An oval pool is treated as a true ellipse: pi times length times width divided by 4. The depth matters just as much: most in-ground pools slope from a shallow end to a deep end, so the calculator averages the two end depths, which is exact for a floor that slopes evenly from end to end.

This calculator is volume-focused only. It does not work out chemical doses. Once you know the gallons, that figure feeds directly into dosing: for a saltwater pool, the Pool Salt Calculator works out how much salt to add to reach your target salt level.

How to Use the Pool Calculator

  1. Choose the pool shape: Rectangular, Oval or Round. The input boxes change to match the shape.
  2. For a rectangular or oval pool, enter the length and width in feet, measured across the water surface. For a round pool, enter the diameter straight across the middle.
  3. Enter the shallow end depth and the deep end depth in feet, measured from the water line to the pool floor. If the pool has one constant depth, enter the same number in both boxes.
  4. Click Calculate, or just type: the results update as you enter the numbers.
  5. Read the Summary tab for the surface area, average depth and volume in cubic feet, gallons and liters.
  6. Open the Compare Depths tab to see how the volume changes at average depths of 3, 4, 5 and 6 feet for the same pool shape and size.

Formula

Average depth (ft) = (shallow end depth + deep end depth) / 2

Surface area, rectangular (sq ft) = length (ft) x width (ft)

Surface area, round (sq ft) = pi x (diameter / 2) squared

Surface area, oval (sq ft) = pi x length (ft) x width (ft) / 4

Volume (cu ft) = surface area (sq ft) x average depth (ft)

Volume (US gallons) = volume (cu ft) x 7.48052

Volume (liters) = volume (US gallons) x 3.78541

The 7.48052 gallons per cubic foot figure comes from the definitions of the units: a US gallon is 231 cubic inches and a cubic foot is 1,728 cubic inches, so 1,728 / 231 = 7.48052. Pool guides often round this to 7.5, which overstates the volume by about a quarter of one percent; this calculator uses the exact figure.

The average-depth formula assumes the floor slopes evenly from the shallow end to the deep end. If the deep end is a short, steep hopper rather than a long slope, averaging the two end depths overstates the volume a little. For that kind of pool, split it into a shallow section and a deep section, work out each volume separately and add them.

A note on oval pools: this calculator treats an oval as a true ellipse. Most above-ground oval pools have two straight sides with round ends, and those hold more water than a true ellipse of the same length and width. For a straight-sided oval, the surface area is (length – width) x width + pi x (width / 2) squared. For a 30 x 15 ft pool at 4 ft of water, the true ellipse gives 10,575 gallons while the straight-sided version gives about 12,020 gallons, so check which shape your pool is before trusting the number.

Worked Example

A rectangular pool 32 ft long and 16 ft wide, 3.5 ft deep at the shallow end and 8 ft deep at the deep end. All steps below use the unrounded values; displayed figures are rounded to two decimals only at the end.

Surface area = 32 x 16 = 512 sq ft.

Average depth = (3.5 + 8) / 2 = 5.75 ft.

Volume = 512 x 5.75 = 2,944 cu ft.

Gallons = 2,944 x 7.48052 = 22,022.65088, displayed as 22,022.65 gallons.

Liters = 22,022.65088 x 3.78541 = 83,364.76287, displayed as 83,364.76 liters.

So the pool holds 22,022.65 gallons, or 83,364.76 liters. That matches the published worked example for the same pool size, which gives 2,944 cubic feet and about 22,023 gallons.

Benefits of Using a Pool Calculator

  • Covers the three common shapes: rectangular, oval and round, with the right area formula for each instead of one rough rule for all of them.
  • Handles sloping floors properly: enter the shallow and deep end depths and the calculator averages them, with the even-slope assumption stated openly.
  • Gives three units at once: cubic feet, US gallons and liters, so the figure is ready for dosing charts, salt tables and pump specs without a separate conversion.
  • Compares depths side by side: the Compare Depths tab shows the volume at 3, 4, 5 and 6 foot average depths, which is useful when planning a pool or checking a fill estimate.
  • Built on exact constants: 7.48052 gallons per cubic foot and 3.78541 liters per gallon, not the rounded 7.5 that pool guides often use.
  • Free and instant: no sign-up, no download, and the results update as you type.

Frequently Asked Questions

How do I work out the average depth of my pool?

Add the shallow end depth and the deep end depth and divide by 2. A pool that is 3.5 ft at the shallow end and 8 ft at the deep end has an average depth of 5.75 ft. Measure both depths from the water line to the floor, not from the top of the wall. This average is exact when the floor slopes evenly from one end to the other. If the deep end drops steeply into a hopper, the average overstates the volume, so measure the shallow and deep sections separately and add them.

How many gallons are in a cubic foot of water?

7.48052 US gallons. A US gallon is defined as 231 cubic inches and a cubic foot is 1,728 cubic inches, so one cubic foot holds 1,728 / 231 = 7.48052 gallons. Many pool guides round this to 7.5, which is close enough for a rough estimate but overstates the volume by about 0.26 percent. This calculator uses the exact 7.48052 figure, and 3.78541 liters per gallon for the liter conversion.

Why does my oval pool hold more water than the calculator says?

Because most above-ground oval pools are not true ellipses: they have two straight sides with round ends, which encloses more area than an ellipse of the same length and width. This calculator uses the true ellipse formula, pi x length x width / 4. For a straight-sided oval, the area is (length – width) x width + pi x (width / 2) squared. A 30 x 15 ft pool at 4 ft of water holds about 10,575 gallons as an ellipse and about 12,020 gallons with straight sides, a difference of roughly 14 percent.

Should I measure the water depth or the wall height?

Always the water depth, from the water line down to the floor. The wall is taller than the water: above-ground pools are sold by wall height, but the water usually sits several inches below the top of the wall, and in-ground pools are rarely filled to the brim. Measuring the wall instead of the water overstates the volume. If you only know the wall height, subtract the gap between the water line and the top of the wall first.

What do I do with the gallon figure once I have it?

It is the input for nearly every other pool calculation. Chlorine, shock and algaecide doses are all given per 10,000 gallons, so the dose scales directly with your pool volume. The Pool Shock Calculator works out the shock dose for your pool volume. For a saltwater pool, the salt to add depends on the gallons and the current salt level, which is why the Pool Salt Calculator asks for the pool volume first. The gallon figure also sets pump run times, since turnover time is pool volume divided by flow rate, and fill time, since a hose at 10 gallons per minute takes about 37 hours to fill a 22,000 gallon pool.

Disclaimer

This calculator gives estimates based on the dimensions you enter and standard geometric formulas. Real pools vary: floors are rarely perfectly even slopes, steps, benches, ledges and attached spas change the volume, and oval pools with straight sides hold more than the true-ellipse formula used here. The results are for planning and estimating only. Always confirm chemical doses against the product label and test the water after dosing rather than relying on a calculated volume alone.

ADVERTISEMENT

ADVERTISEMENT