How far a floor joist can span is a code question with a table answer, and getting it wrong means a bouncy floor at best. This free floor joist calculator reads the 2021 IRC floor joist span tables for you.
Spans come from the 2021 IRC floor joist tables for No. 2 grade lumber. A closer spacing carries the same joist farther, and a deeper joist spans farther than a wider-spaced shallow one.
Span to check is the clear distance between supports that the joists must bridge. Floor length is the dimension the joists repeat along, used only for the joist count. Sleeping areas and attics reached by a fixed stair use the 30 psf table; all other living areas use 40 psf.
| Joist Size | Max Span | Deflection Limit (L/360) | Spans Your Distance? |
|---|
Each row uses the species, spacing and loads entered above, at a different joist size. Going up one joist size typically adds about two to three feet of span, which is why a 2x10 is the usual answer where a 2x8 falls just short.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
How far a floor joist can span is a code question with a table answer, and getting it wrong means a bouncy floor at best. This free floor joist calculator reads the 2021 IRC floor joist span tables for you. Pick the species and grade, the joist size and the spacing, choose the live and dead loads, and it gives the maximum allowable span, tells you whether your span passes, and estimates how many joists the floor needs and how many board feet of lumber to order. It covers the four common framing species at No. 2 grade, sizes from 2×6 to 2×12, and spacings of 12, 16, 19.2 and 24 inches.
A floor joist is the horizontal framing member that carries a floor. Joists run in parallel rows, usually 12, 16 or 24 inches apart on center, with their ends bearing on walls, beams or joist hangers, and the subfloor is fixed to their top edges. The maximum span is the longest clear distance between supports that a joist of a given size, species, grade and spacing may bridge under a given load. It is set by two limits: the joist must be strong enough in bending and shear, and it must not deflect (sag) more than the span divided by 360 under live load, which is the L/360 limit printed on the code tables.
The International Residential Code publishes the spans as two tables. Table R502.3.1(1) covers sleeping areas and attics reached by a fixed stair, with a 30 psf live load. Table R502.3.1(2) covers all other living areas, with a 40 psf live load. Each table has a 10 psf and a 20 psf dead load column: 10 psf suits a standard floor, while 20 psf covers a heavy floor such as tile set on a mortar bed. Three things move the answer most: deeper joists span farther, closer spacing spans farther, and heavier loads span less. Species matters too, but less than size and spacing: at 16 inches on center under 40 psf live and 10 psf dead load, a 2×10 spans 14 ft 0 in in Southern pine No. 2 and 15 ft 7 in in Douglas fir-larch No. 2.
These tables are for indoor floors in a house. Deck joists use a separate table, IRC Table R507.6, which applies a wet-service factor to the lumber values and adds cantilever rules, so its spans differ from the indoor tables for most species. This calculator does not size deck joists. Once the deck framing is sized, the Decking Calculator works out how many deck boards the deck surface needs.
Joists bear on beams and headers: the Wood Beam Span Calculator sizes the beam under the joists, and the Door Header Size Calculator sizes the header over an opening in the wall below.
The maximum span is a lookup in the IRC tables, not a formula: each combination of species, grade, size, spacing, live load and dead load has one tabulated value. The remaining outputs are arithmetic.
Deflection limit (inches) = maximum span (inches) / 360
Joists needed = ceiling(floor length in inches / spacing in inches) + 1
The plus one is the end joist: a floor 20 ft long at 16 inches on center has joists at 0, 16, 32 and so on up to 240 inches, which is 16 joists. Where the floor length is not an exact multiple of the spacing, the ceiling rounds up and the last bay is narrower than the rest.
Board feet per joist = 2 x joist depth (inches) x span (feet) / 12
Board feet use nominal dimensions, so a 2×10 uses 2 and 10, not its actual 1.5 by 9.25 inches. Total board feet is the joists needed multiplied by the board feet per joist.
Order length (feet) = span rounded up to the next whole 2 ft increment
Lumber is sold in 2 ft increments, so a 13 ft span needs 14 ft boards. The board feet are worked out on the span itself, not the order length.
Southern pine No. 2, 2×10 joists at 16 inches on center, living area (40 psf live load, 10 psf dead load), span to check 12 ft, floor length 20 ft.
Maximum span from Table R502.3.1(2) = 14 ft 0 in = 168 inches.
Span to check = 12 ft = 144 inches, which is 24 inches (2 ft 0 in) under the limit, so the span passes.
Deflection limit = 168 / 360 = 0.47 inches at the maximum span.
Smallest size that spans 12 ft: the 2×8 maximum is 11 ft 10 in (142 inches), which is short, so the 2×10 is the smallest size that passes.
Joists needed = ceiling(240 / 16) + 1 = 15 + 1 = 16 joists.
Order length = 12 ft, already a whole 2 ft increment.
Board feet per joist = 2 x 10 x 12 / 12 = 20.00 board feet.
Total board feet = 16 x 20.00 = 320.00 board feet.
So sixteen 2×10 joists, 12 ft long, carry this floor, and the order is about 320 board feet of Southern pine.
It depends on the species, spacing and load. Under the 2021 IRC, a Southern pine No. 2 2×10 at 16 inches on center in a living area (40 psf live, 10 psf dead) may span 14 ft 0 in. The same joist in Douglas fir-larch No. 2 spans 15 ft 7 in, and at 12 inches on center the Southern pine 2×10 reaches 16 ft 2 in. In a sleeping area at 30 psf live load the spans are longer again. There is no single number for a 2×10, which is why the table lookup matters.
16 inches on center is the standard for a house floor, and it buys a longer span and a stiffer floor. A Southern pine No. 2 2×10 under 40 psf live and 10 psf dead load spans 14 ft 0 in at 16 inches but only 11 ft 5 in at 24 inches, so wider spacing needs deeper joists for the same span. 24 inch spacing is used where the span is short and the subfloor is thick enough to span the wider bays, but the floor will feel less stiff. 19.2 inch spacing sits between the two and is common with engineered joists.
It is the sag limit the code tables are built on: under live load alone, a joist may deflect by no more than its span divided by 360. For a 14 ft span that is 168 / 360 = 0.47 inches. The limit is about feel as much as strength: a floor that meets L/360 will not sag visibly, but it can still feel springy underfoot, which is why many builders go one size up or tighten the spacing for a stiffer floor. Both IRC joist tables print L/360 in their titles.
No. Deck joists are sized under IRC Table R507.6, a separate table built on wet-service lumber values with its own cantilever rules (L/180 at the cantilever with a 220 pound point load on the end). Its spans differ from the indoor floor tables for most species: a Douglas fir-larch, hem-fir or spruce-pine-fir 2×10 at 16 inches on center spans 13 ft 7 in as a deck joist, against 15 ft 7 in, 15 ft 2 in and 15 ft 5 in indoors. Use a deck joist table or the AWC DCA 6 deck guide for the framing, then use the Decking Calculator to work out the deck boards.
Dead load is the weight of the floor itself: joists, subfloor, underlayment and finish. A standard timber floor with carpet or vinyl is about 10 psf. A heavy finish, such as ceramic tile set on a mortar bed or a thick stone floor, pushes the dead load to 20 psf, and the code tables give shorter spans for it. A Southern pine No. 2 2×10 at 16 inches on center in a living area drops from 14 ft 0 in at 10 psf dead load to 12 ft 10 in at 20 psf, so choosing the wrong column can put a floor over its limit.
This calculator is a guide based on the prescriptive span tables in the 2021 International Residential Code, Tables R502.3.1(1) and R502.3.1(2), for No. 2 grade sawn lumber in the four listed species, with deflection limited to L/360. It covers simple spans with uniform loads only. It does not cover cantilevers, concentrated loads, joists under bearing partitions, notches and holes, engineered joists, or floor systems in high wind or seismic areas, which have their own rules in the code. The joist count and board feet are estimates for ordering and do not allow for waste, blocking, rim joists or offcuts. Local building codes and amendments govern, and unusual cases should be checked by a structural engineer or the local building department before building.
ADVERTISEMENT
ADVERTISEMENT