Building a pond starts with two numbers: how much water it will hold, and how big a liner you need to buy. Get the volume wrong and the pump is undersized, the fish are overstocked and the water treatments are dosed for the wrong amount of water. Get the liner wrong and the sheet comes up short at the deepest point. This free pond calculator works out both from the shape and size of your pond. Pick rectangular, oval or circular, enter the dimensions and depths, and it shows the volume in cubic feet, cubic yards, US gallons and liters, plus the liner length and width, with a comparison table for different depths.
For an oval pond, enter the longest length and the widest width. For a circular pond, enter the diameter across the middle.
Use the average depth for the water volume, since pond floors are rarely flat. Use the maximum depth for the liner, so it reaches the deepest point. The maximum depth must be at least the average depth. The liner size below includes a 1 ft overlap on every edge.
Please enter values above 0 for the pond size and depths.
| Average Depth | Volume (cubic feet) | Volume (cubic yards) | Volume (gallons) |
|---|
Each row uses the shape and dimensions entered above, at a different average depth. Liner size is not shown here because it depends on the maximum depth, not the average depth.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
Pond volume is the amount of water a pond holds, worked out as surface area multiplied by average depth. The shape decides the area: a rectangular pond is length times width, a circular pond is pi times the radius squared, and an oval pond is the ellipse area, pi divided by 4 times length times width, which is about 79 percent of the rectangle that encloses it. The depth that matters for volume is the average depth, not the deepest point, because pond floors are rarely flat: shelves, slopes and a deeper middle all pull the average below the maximum.
The liner is a separate calculation with its own depth. A flexible liner is a single flat sheet that has to cover the pond, run down one wall and up the other, and leave an overlap flap on every edge to anchor under stone or soil. That is why the liner size uses the maximum depth, not the average: the sheet must reach the deepest point and still have material left over at the edge. Liner length equals pond length plus twice the maximum depth plus twice the overlap, and liner width follows the same rule. This calculator uses a 1 foot overlap on every edge, the standard allowance for a typical garden pond.
Rectangular surface area (sq ft) = length (ft) x width (ft)
Circular surface area (sq ft) = pi x (diameter (ft) / 2) squared
Oval surface area (sq ft) = (pi / 4) x length (ft) x width (ft)
Volume (cu ft) = surface area (sq ft) x average depth (ft)
Volume (cu yd) = volume (cu ft) / 27
Volume (gallons) = volume (cu ft) x 7.48052
Volume (liters) = volume (gallons) x 3.78541
Liner length (ft) = length (ft) + 2 x maximum depth (ft) + 2 x overlap (ft)
Liner width (ft) = width (ft) + 2 x maximum depth (ft) + 2 x overlap (ft)
The overlap used throughout this calculator is 1 foot on every edge, so 2 feet is added to each dimension for overlap. For a circular pond the liner is cut as a square, using the diameter in place of both the length and the width. The conversion factors come from the definitions of the units: one cubic foot is 1,728 cubic inches and one US gallon is exactly 231 cubic inches, so one cubic foot is 1,728 / 231 = 7.48052 US gallons, and one US gallon is 3.78541 liters.
A rectangular pond 12 ft long and 8 ft wide, with a 3 ft average depth and a 4 ft maximum depth, and a 1 ft liner overlap on every edge. All steps below use the unrounded values; displayed figures are rounded to two decimals only at the end.
Surface area = 12 x 8 = 96 sq ft.
Volume = 96 x 3 = 288 cu ft.
Volume in cubic yards = 288 / 27 = 10.666667 cu yd, displayed as 10.67 cu yd.
Volume in gallons = 288 x 7.48052 = 2,154.389760 gallons, displayed as 2,154.39 gallons.
Volume in liters = 2,154.389760 x 3.78541 = 8,155.248541 liters, displayed as 8,155.25 liters.
Liner length = 12 + (2 x 4) + (2 x 1) = 22 ft.
Liner width = 8 + (2 x 4) + (2 x 1) = 18 ft.
So the pond holds 2,154.39 gallons (8,155.25 liters) of water and needs a 22 ft x 18 ft liner. In practice you would round up to the nearest available sheet size, since liners are sold in standard sizes and cutting a sheet short cannot be fixed.
Take several depth soundings across the pond, at the middle, near the edges and on any shelves, then average them. A pond that is 4 feet at its deepest point but shallow around the margins might average only 2.5 to 3 feet, and using the maximum depth for the volume would overstate the water by a third or more. For a bowl-shaped pond with no flat bottom, a useful rule of thumb is that the average depth is about 0.4 times the maximum depth. If the pond is not dug yet, work from the planned profile: a pond with a 4 foot deep zone and 1 foot shelves over half its area averages about 2.5 feet.
Because the two numbers answer different questions. Volume is about the water, and water fills the whole basin, so the average depth is the right measure. The liner is a physical sheet that has to follow the shape of the hole: it runs down one wall, across the bottom at its deepest point, and up the other wall, so it must be long enough to reach the deepest point with material to spare. Sizing the liner from the average depth would leave it short at the deep end. That is why this calculator asks for both depths and uses each one where it belongs.
One foot (about 30 cm) on every edge is the standard allowance for a typical garden pond, and it is the figure this calculator uses. The overlap is the flap you bury under soil or weigh down with edging stone, and it stops the liner slipping into the pond as it fills and settles. Small formal ponds capped with paving can manage with 6 inches, while large or informal ponds often use 18 to 24 inches for extra anchoring and room to shape planted margins. More overlap is cheap insurance: a liner that comes up short cannot be stretched, but a generous flap can always be trimmed.
Because the oval does not fill the corners of the rectangle that encloses it. An oval (ellipse) with length L and width W has an area of pi divided by 4 times L times W, and pi divided by 4 is 0.7854, so the oval covers about 79 percent of the bounding rectangle. A 10 ft by 6 ft oval therefore has a surface area of about 47.12 square feet, while the same-sized rectangle has 60 square feet. At the same depth the oval holds about 21 percent less water, though it needs the same size liner, because the liner formula is based on the overall length and width.
As a rule of thumb, a pond pump should circulate the entire volume of the pond at least once every hour. A pond holding 2,154 gallons therefore needs a pump rated for at least about 2,154 gallons per hour (GPH). Ponds with koi, a waterfall, a long run of tubing or a lot of vertical lift should size up to roughly twice the volume per hour to keep the water well oxygenated and the filter fed. Use the gallon figure from this calculator as the starting point, then check the pump’s rated flow at your actual head height, since published flow rates are usually measured with no lift.
This calculator gives estimates based on the shape, dimensions and depths you enter, using standard geometric formulas for rectangular, oval and circular ponds. Real ponds have shelves, slopes, rocks and irregular outlines that reduce the volume below the geometric figure, so treat the result as a planning estimate rather than an exact measurement. The liner size includes a 1 foot overlap on every edge and assumes a smooth excavation; always check the real path over shelves and contours before buying, and round up to the nearest available sheet size. Pump and fish stocking guidance is general advice only: confirm pump sizing, filtration and stocking levels with a pond supplier or specialist for your climate, fish and setup.
ADVERTISEMENT
ADVERTISEMENT