Gallons per minute, or GPM, is the number that tells you how fast water is actually moving, whether you are sizing a well pump, checking a garden hose, filling a pool or working out if your pipes can feed two showers at once. This free gallons per minute calculator measures flow two ways. Time how long it takes to fill a bucket of known size, or enter a pipe diameter and water velocity, and it shows the flow rate in GPM plus liters per minute, gallons per hour, liters per second, cubic feet per minute and cubic meters per hour, with a comparison table for common pipe sizes.
Use the bucket test when you can catch the water and time it. Use the pipe method when you know the pipe size and the water velocity instead.
Fill a container of known size, such as a 5 gallon bucket, and time it with a stopwatch. Repeat the test two or three times and use the average time for a steadier result.
Always use the inside diameter, not the nominal size: a 1 inch Schedule 40 pipe is 1.049 inches inside. Household water usually moves at about 3 to 8 ft/s, with 5 ft/s a common design figure.
Please enter values above 0 for the inputs of the selected method.
| Nominal Size | Inside Diameter | Flow Rate (GPM) | Flow Rate (L/min) |
|---|
Each row uses the water velocity entered above (default 5 ft/s) with the Schedule 40 inside diameter for that nominal size. Flow grows with the square of the diameter, so a 2 inch pipe carries about four times what a 1 inch pipe carries at the same velocity.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
Gallons per minute is a volumetric flow rate: the number of US gallons of water passing a point every minute. It is the standard unit for water flow in American plumbing, irrigation, wells and pool work. A flow of 7.5 GPM means 7.5 gallons pass the point each minute, which is 450 gallons in an hour.
There are two practical ways to find it. The bucket test measures flow directly: catch the water in a container of known size and time it. The pipe method calculates it from the pipe: flow equals the cross-sectional area of the pipe times the speed of the water inside it, which in US plumbing units becomes GPM = 2.448 x inside diameter (inches) squared x velocity (ft/s). The 2.448 constant folds together the circle area formula, the inch-to-foot conversion and the conversion from cubic feet per second to gallons per minute.
The inside diameter is the number that matters, not the nominal size on the label. A 1 inch Schedule 40 pipe is 1.049 inches inside, and a 2 inch Schedule 40 pipe is 2.067 inches inside, so using the nominal size understates the flow. All gallons here are US gallons (1 US gallon = 3.78541 liters); an imperial gallon is larger at 4.54609 liters, so UK figures convert differently.
Bucket test: GPM = volume (gallons) / time (seconds) x 60
Pipe method: GPM = 2.448 x inside diameter (in) squared x velocity (ft/s)
Liters per minute = GPM x 3.78541
Gallons per hour = GPM x 60
Liters per second = liters per minute / 60
Cubic feet per minute = GPM / 7.48052
Cubic meters per hour = liters per minute x 0.06
The 2.448 constant comes from flow = area x velocity worked in plumbing units: pi / 4 (circle area) / 144 (square inches to square feet) x 448.831 (cubic feet per second to GPM) = 2.448. The bucket test formula is the same idea measured directly: gallons divided by seconds gives gallons per second, and multiplying by 60 gives gallons per minute. The conversion factors are exact unit definitions: 1 US gallon = 3.78541 liters and 1 cubic foot = 7.48052 US gallons.
A bucket test collects 5 gallons in 40 seconds. All steps below use the unrounded values; displayed figures are rounded to two decimals only at the end.
GPM = 5 / 40 x 60 = 7.50 GPM.
Liters per minute = 7.5 x 3.78541 = 28.390575, displayed as 28.39 L/min.
Gallons per hour = 7.5 x 60 = 450.00 GPH.
Liters per second = 28.390575 / 60 = 0.473176, displayed as 0.47 L/s.
Cubic feet per minute = 7.5 / 7.48052 = 1.002604, displayed as 1.00 CFM.
Cubic meters per hour = 28.390575 x 0.06 = 1.703435, displayed as 1.70 m3/h.
So the tap flows at 7.50 GPM, or 28.39 liters per minute. Using the pipe method instead, a 1 inch Schedule 40 pipe (1.049 inches inside) with water moving at 5 ft/s gives GPM = 2.448 x 1.049 squared x 5 = 2.448 x 1.100401 x 5 = 13.468908, displayed as 13.47 GPM, which is 50.99 L/min.
Time how long it takes to fill a container of known size, then divide the gallons by the seconds and multiply by 60. A 5 gallon bucket that fills in 40 seconds is 5 / 40 x 60 = 7.5 GPM. Repeat the test two or three times and average the results, since a single timing can easily be off by a second or two. If you cannot catch the water, use the pipe method instead: GPM = 2.448 x inside diameter in inches squared x velocity in feet per second.
Most homes need 6 to 12 GPM at peak demand, when several fixtures run at once. A well yielding 5 to 10 GPM is adequate for most homes with a pressure or storage tank, 10 to 20 GPM is good, and below 3 GPM is very low and usually needs a storage tank. The pump matters as much as the well: the well yield is how fast the aquifer refills the well, while the pump flow rate is how fast water reaches the house, and a storage tank lets a low-yield well serve a normal household.
A standard 5/8 inch garden hose at normal household pressure typically delivers about 5 to 10 GPM. A 3/4 inch hose at higher pressure can deliver more, and some sources quote 9 to 17 GPM for that setup. The real figure depends on the hose diameter and length, the water pressure and the nozzle, so a bucket test at your own tap is the reliable way to know. A hose running at 7.5 GPM moves 450 gallons in an hour, which is worth knowing before you leave it running.
Multiply by 3.78541, because 1 US gallon = 3.78541 liters. So 7.5 GPM is 28.39 L/min, and 10 GPM is 37.85 L/min. To go the other way, divide liters per minute by 3.78541. Watch out for the gallon type: these figures use US gallons. An imperial gallon is 4.54609 liters, so a UK gallon per minute is 4.54609 L/min, about 20 percent more than a US GPM.
Because flow grows with the square of the diameter. Double the inside diameter and the pipe carries four times as much water at the same velocity. At 5 ft/s, a 1/2 inch Schedule 40 pipe (0.622 inches inside) carries 4.74 GPM, a 1 inch pipe (1.049 inches inside) carries 13.47 GPM, and a 2 inch pipe (2.067 inches inside) carries 52.30 GPM. That is also why the inside diameter matters: the nominal size is only a label, and using it instead of the true bore understates the flow.
This calculator gives estimates based on the figures you enter and standard formulas for water flow. Real flow depends on water pressure, pipe condition, fittings, elevation and the accuracy of your timing or velocity estimate, so the results are approximate. The pipe method assumes a steady average velocity across the full bore and clean water at normal temperatures. For pump sizing, well yield certification or any work governed by a plumbing code, confirm the figures with a licensed plumber or engineer. This tool is for planning and estimating only.
ADVERTISEMENT
ADVERTISEMENT