A concrete driveway is one of the biggest single items in a home improvement budget, and the final bill depends on more than just the size of the slab. Thickness, the price of ready-mix concrete in your area and the finish you choose all move the number. This concrete driveway cost calculator works out the area, the concrete volume including a 10 percent waste allowance, the material cost, the finishing and labor cost, and the total estimated cost, so you can budget the job before you call a contractor.
Most residential driveways are 4 inches thick. Use 5 or 6 inches if heavy vehicles, RVs or work trucks will park on it regularly.
The default $150 per cubic yard is the 2026 US average for 4,000 PSI driveway mix. Finishing rates per sq ft: plain broom $6.50, exposed aggregate $9.00, stamped $13.00. These cover placing, forming, base prep and finishing, with the decorative finishes including their extra labor and materials.
Please enter values above 0 for length, width, thickness and concrete price.
| Thickness | Volume (with 10% waste) | Material Cost | Total Cost | Cost per Sq Ft |
|---|
Each row uses your entered area, concrete price and finish, and changes only the slab thickness. Thicker slabs use more concrete, so the material cost rises while the finishing cost per sq ft stays the same.
ADVERTISEMENT
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
A concrete driveway cost calculator is a free online tool that estimates what a new concrete driveway will cost based on its dimensions, slab thickness, local concrete price and surface finish. It starts from the driveway area, converts that into cubic yards of concrete, adds a waste allowance for spillage and uneven ground, then prices the concrete and the finishing work separately so you can see where the money goes.
Most residential driveways are 4 inches thick and use a 4,000 PSI mix, which is the standard strength for driveways and garage floors. Heavier vehicles call for a 5 or 6 inch slab, which uses more concrete and costs more per square foot. If you only need the volume of concrete for a pour, without the cost breakdown, the Concrete Calculator works that out for any slab shape. If you are comparing concrete with asphalt, the Asphalt Calculator prices the same driveway in hot mix asphalt.
Area (sq ft) = Length (ft) x Width (ft)
Concrete volume, exact (yd3) = Area (sq ft) x (Thickness (in) / 12) / 27
Concrete volume, order amount (yd3) = Exact volume x 1.10
The 1.10 factor is a 10 percent waste allowance for spillage, uneven subgrade and over-excavation. Order the volume with waste, not the exact volume.
Concrete material cost = Order volume (yd3) x Concrete price ($ per yd3)
Finishing and labor cost = Area (sq ft) x Finishing rate ($ per sq ft)
The finishing rate depends on the finish type: plain broom finish $6.50 per sq ft, exposed aggregate $9.00 per sq ft, stamped $13.00 per sq ft. These rates cover placing, forming, base prep and finishing, with the decorative finishes including their extra labor and materials.
Total estimated cost = Concrete material cost + Finishing and labor cost
Cost per square foot = Total estimated cost / Area (sq ft)
Take a standard two-car driveway, 50 ft long and 12 ft wide, 4 inches thick, with concrete at $150 per cubic yard and a plain broom finish. All steps below use the unrounded values; displayed figures are rounded to two decimals only at the end.
Step 1, area: 50 x 12 = 600 sq ft.
Step 2, exact volume: 600 x (4 / 12) / 27 = 200 / 27 = 7.4074 yd3, displayed as 7.41 yd3.
Step 3, volume with waste: 7.4074 x 1.10 = 8.1481 yd3, displayed as 8.15 yd3. This is the amount to order.
Step 4, material cost: 8.1481 x $150 = $1,222.22.
Step 5, finishing and labor: 600 x $6.50 = $3,900.00.
Step 6, total: $1,222.22 + $3,900.00 = $5,122.22.
Step 7, cost per square foot: $5,122.22 / 600 = $8.54 per sq ft.
So a 50 by 12 ft plain concrete driveway at 4 inches thick costs an estimated $5,122.22, or $8.54 per square foot, at the default prices.
In 2026, a plain broom-finish concrete driveway costs about $8 to $15 per square foot installed, with most two-car driveways landing between $4,800 and $9,000. Exposed aggregate runs about $10 to $18 per square foot, and stamped concrete about $15 to $25 per square foot. Angi puts the national average project cost at $6,400, with most homeowners spending $2,700 to $14,500. Local labor rates and slab thickness move the number up or down. A gravel surface costs far less per square foot; the Gravel Driveway Calculator works out its tonnage and cost.
Multiply the area in square feet by the thickness in feet, then divide by 27. A 600 sq ft driveway at 4 inches thick needs 7.41 cubic yards exactly, and 8.15 cubic yards with the 10 percent waste allowance this calculator applies. For a volume-only figure for any slab, use the Concrete Calculator.
Ready-mix concrete delivered costs about $120 to $180 per cubic yard in most US markets. Angi reports an average of about $130 per cubic yard, with high-PSI driveway mix at about $150 per cubic yard, which is the default in this calculator. Orders under a full truckload (about 10 cubic yards) often carry a short-load fee of $40 to $60 per cubic yard.
Four inches is standard for cars and light trucks. Use 5 inches if heavier vehicles park on it regularly, and 6 inches for RVs, work trucks or weak soil. A thicker slab uses proportionally more concrete: at 600 sq ft, going from 4 to 6 inches raises the order volume from 8.15 to 12.22 cubic yards and the total from $5,122.22 to $5,733.33 at the default prices.
No. Tearing out and hauling away an existing driveway typically adds $1 to $4 per square foot, and sealing adds about $1 to $2 per square foot. This calculator covers concrete material plus placing, forming, base prep and finishing for a new pour. Add demolition and sealing separately when budgeting a replacement.
This calculator gives an estimate based on national average 2026 US prices and the rates you enter. Actual costs vary by region, supplier, site conditions, soil type, access, permits and contractor rates. The 10 percent waste allowance is a planning figure; uneven ground or a sloped site may need more. Always get a written quote from a licensed local concrete contractor before committing to a project. TechRaxy is not responsible for decisions made using this estimate.
ADVERTISEMENT
ADVERTISEMENT