A gravel driveway is one of the cheapest ways to build a solid driving surface, but ordering the wrong amount of stone wastes money either way. Order too little and you pay a second delivery fee. Order too much and you are left with a pile of gravel you have nowhere to put. This calculator works out exactly how much gravel your driveway needs in cubic feet, cubic yards and tons, and what it should cost at your local price per ton. Enter your driveway length, width and depth, pick your gravel type, and the results update straight away.
Measure the finished driveway in feet and enter the depth you want after compaction. Most residential driveways use 4 inches of gravel over a prepared base. The gravel type sets the weight per cubic yard, because different stone weighs differently.
Please enter values above 0 for length, width, depth and price per ton.
| Depth | Volume (ft3) | Volume (yd3) | Weight (tons) | Estimated Cost |
|---|
All rows use the length, width, gravel type and price per ton you entered, and change only the depth. Figures are net finished volumes with no waste allowance, so add about 10% when ordering.
ADVERTISEMENT
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
A gravel driveway calculator is a free online tool that turns the size of your driveway into a gravel order. You give it the length, width and depth of the area you want to cover, and it returns the volume in cubic feet and cubic yards, the weight in tons, and the estimated material cost. Suppliers usually sell gravel by the ton, so the weight figure is the one you will quote when you phone for a price.
The calculator covers rectangular driveways, which is the shape almost every home driveway takes. It also lets you choose between three common gravel types, because a cubic yard of pea gravel weighs less than a cubic yard of crusher run, and that difference changes both the tonnage and the price. If you need quantities for a different shape, such as a round patio or a path, the general Gravel Calculator on this site covers more shapes and stone types. For a wider choice of stone types, the Crushed Stone Calculator covers five, with a density for each.
The calculator uses three steps, all in imperial units.
Volume in cubic feet = length (ft) x width (ft) x (depth in inches / 12)
Volume in cubic yards = volume in cubic feet / 27
Weight in tons = volume in cubic yards x tons per cubic yard
Estimated cost = weight in tons x price per ton
The tons per cubic yard depends on the gravel type: pea gravel 1.35, crushed stone #57 1.375, and crusher run 1.50. These are standard loose bulk densities for dry stone, verified against several aggregate supplier references. Wet stone weighs more, so the tonnage is an estimate, not a weighbridge figure.
Take a typical single-car driveway: 50 feet long, 12 feet wide, 4 inches deep, using crushed stone #57 at $45 per ton. All steps below use the unrounded values; displayed figures are rounded to two decimals only at the end.
Step 1, area: 50 x 12 = 600 square feet.
Step 2, depth in feet: 4 / 12 = 1/3 foot, or 0.3333 feet.
Step 3, volume in cubic feet: 600 x 1/3 = 200.00 cubic feet.
Step 4, volume in cubic yards: 200.00 / 27 = 7.41 cubic yards.
Step 5, weight: 7.4074 x 1.375 = 10.19 tons.
Step 6, cost: 10.1852 x $45 = $458.33.
So the driveway needs 7.41 cubic yards, or 10.19 tons, of crushed stone, at an estimated material cost of $458.33, which is $0.76 per square foot. In practice you would order about 10% extra, roughly 11.2 tons, to allow for compaction and spillage.
A 50 foot by 12 foot driveway at 4 inches deep needs 7.41 cubic yards, which is 10.19 tons of crushed stone #57. Widen the driveway or deepen the layer and the tonnage rises in direct proportion, so a 50 foot driveway at 6 inches deep needs 15.28 tons instead.
Four inches after compaction is the standard depth for a passenger-car driveway on a prepared base. Six inches suits heavier use, soft soil, or trucks and RVs. Two to three inches works only as a thin top-up over an existing firm base, not as a new driveway. Under the gravel, a compacted base layer stops ruts forming; the Road Base Calculator works out how much base material you need.
It depends on the stone. Pea gravel weighs about 1.35 tons per cubic yard, crushed stone #57 about 1.375 tons, and crusher run about 1.50 tons. Moisture adds weight, so a load delivered after rain can weigh 10 to 15% more than the same volume of dry stone.
Order by the ton when you can. Most aggregate yards sell by weight because a cubic yard of loose stone settles on the truck, so the volume you see is not always the volume you get. Tons are measured on a certified scale, so they are the more reliable figure. If your supplier only quotes in cubic yards, this calculator gives you that number too.
At $45 per ton, a 4 inch layer of crushed stone #57 costs about $0.76 per square foot for the stone alone. Delivery, grading, a base layer and edging add to that, so a finished gravel driveway usually lands between $1.50 and $3.00 per square foot all in. For a general estimate on other shapes and areas, see the Gravel Calculator.
The figures from this calculator are estimates for planning purposes. Actual tonnage varies with the quarry source, stone size, moisture content and how much the layer compacts under traffic. Prices vary by region, supplier and delivery distance, and delivery charges are not included. Always confirm the final quantity and price with your supplier before ordering, and check local rules on drainage, driveway edges and permits before you start work.
ADVERTISEMENT
ADVERTISEMENT