A carmaker’s horsepower figure is measured at the engine’s crankshaft, but that is not the power that reaches the road. Some of it is lost to friction and rotating mass in the gearbox, driveshaft and differentials before it ever gets to the tyres. This wheel horsepower calculator converts crank horsepower to wheel horsepower for front-wheel drive, rear-wheel drive and all-wheel drive cars, using typical drivetrain loss figures you can adjust. Enter your crank horsepower, drivetrain type and vehicle weight to see your wheel horsepower, your drivetrain loss and your power-to-weight ratio in seconds.
The drivetrain loss field fills in automatically when you change the drivetrain type, using a typical value for that layout: 12% for FWD, 15% for RWD and 20% for AWD. You can edit it to match your own car, your transmission type or a dyno result. Typical ranges are roughly 10-15% for FWD, 15-20% for RWD and 20-25% for AWD, and actual losses vary by car, transmission and dyno.
Please enter crank horsepower above 0, a drivetrain loss between 0% and 100%, and a vehicle weight above 0 lb.
| Drivetrain | Typical Loss | Wheel HP | Loss (hp) | Wheel HP per 1,000 lb |
|---|
All rows use the crank horsepower and vehicle weight you entered above, with the typical loss for each drivetrain layout: 12% FWD, 15% RWD and 20% AWD.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
The Wheel Horsepower Calculator is a free tool that converts crank horsepower, the power your engine produces at the flywheel, into wheel horsepower, the power that actually reaches the driven wheels. The gap between the two is drivetrain loss: the power absorbed by the transmission, driveshaft, differentials and axles as torque travels from the engine to the tyres. A car rated at 300 hp at the crank typically puts down around 255 hp at the wheels in rear-wheel drive form, because roughly 15 percent is lost along the way.
Wheel horsepower is the number that matters for acceleration, because it is the power actually pushing the car forward. It is also the number a chassis dyno measures, which is why dyno results are always lower than the manufacturer’s rating. If you need to work out your engine’s crank horsepower first, use our Engine Horsepower Calculator, which estimates crank hp from torque and rpm or from quarter-mile elapsed time and weight. This calculator then takes that crank figure and applies your drivetrain loss to estimate wheel horsepower, plus a power-to-weight figure based on your vehicle’s weight.
Drivetrain loss (hp) = Crank horsepower x (Drivetrain loss percent / 100)
Wheel horsepower = Crank horsepower – Drivetrain loss (hp)
Wheel hp per 1,000 lb = Wheel horsepower / Vehicle weight (lb) x 1,000
Weight per wheel hp = Vehicle weight (lb) / Wheel horsepower
To work backwards from a dyno result, divide wheel horsepower by (1 – loss percent / 100). For example, 255 wheel hp with a 15 percent loss means about 300 crank hp: 255 / 0.85 = 300.
The power-to-weight assessment is based on wheel hp per 1,000 lb: under 50 is Modest power for the weight, 50 to under 75 is Balanced everyday performance, 75 to under 100 is Strong performance, 100 to under 150 is High performance, and 150 or more is Supercar territory.
Take a rear-wheel drive car rated at 300 crank hp, with a 15 percent drivetrain loss and a weight of 3,500 lb.
First, the drivetrain loss is 300 x 15 percent = 45 hp.
Wheel horsepower is 300 – 45 = 255.00 hp.
Wheel hp per 1,000 lb is 255 / 3,500 x 1,000 = 72.86 WHP per 1,000 lb.
Weight per wheel hp is 3,500 / 255 = 13.73 lb per WHP.
At 72.86 wheel hp per 1,000 lb, the assessment is Balanced everyday performance, in the 50 to under 75 band. The same engine in a front-wheel drive car at 12 percent loss would put down 264.00 wheel hp, and in an all-wheel drive car at 20 percent loss it would put down 240.00 wheel hp.
Crank horsepower, also called brake horsepower, is measured at the engine’s crankshaft or flywheel on an engine dyno, before any drivetrain components are attached. Wheel horsepower is measured at the driven wheels on a chassis dyno, after the transmission, driveshaft and differentials have taken their share. Wheel horsepower is always lower, typically by 10 to 25 percent depending on the drivetrain layout. Manufacturers advertise crank horsepower, so a car rated at 300 hp will usually show around 240 to 270 hp on a chassis dyno.
Typical drivetrain loss is roughly 10 to 15 percent for front-wheel drive, 15 to 20 percent for rear-wheel drive and 20 to 25 percent for all-wheel drive. This calculator uses typical values of 12 percent for FWD, 15 percent for RWD and 20 percent for AWD. Actual losses vary by car, transmission and dyno: manual gearboxes are generally more efficient than traditional torque-converter automatics, dual-clutch transmissions sit between the two, and worn components, thick fluids and underinflated tyres all add drag. Treat the percentage as a rule of thumb, not a measurement.
An all-wheel drive system has more hardware between the engine and the tyres: a centre differential or multi-plate clutch pack, a transfer case, a second driveshaft and a second axle differential, plus more rotating mass overall. Every extra gear mesh and bearing adds friction, and every extra spinning part absorbs energy. Front-wheel drive has the shortest power path, with the gearbox and differential combined into one transaxle close to the engine, which is why it typically loses the least power.
Yes, roughly. Wheel horsepower and weight are the two biggest inputs to straight-line acceleration, which is why the calculator shows wheel hp per 1,000 lb. A car with more wheel hp per pound will generally accelerate harder than a heavier or lower-powered one, though gearing, traction, launch technique and aerodynamics also matter. To turn your wheel horsepower and weight into an estimated 0-60 time, use our 0-60 Calculator.
No. Brake horsepower is measured at the engine’s crankshaft and is the figure manufacturers quote. Wheel horsepower is what remains after drivetrain loss and is what a chassis dyno measures. To convert a wheel horsepower figure back to crank horsepower, divide by (1 – loss percent / 100). For example, 255 wheel hp with a 15 percent loss is 255 / 0.85 = 300 crank hp. If your dyno sheet shows wheel horsepower and you want to compare it with a manufacturer’s rating, that is the conversion to use.
This calculator provides an estimate for general information only. Drivetrain loss percentages are typical rules of thumb, not measurements, and actual losses vary by vehicle, transmission type, component condition, tyre pressure and the dyno used. Chassis dyno results also vary by operator, correction factor and ambient conditions, so treat wheel horsepower figures as estimates within a few percent. For an exact wheel horsepower figure, have the vehicle tested on a chassis dyno. Techraxy is not responsible for decisions made based on these estimates.
ADVERTISEMENT
ADVERTISEMENT