How fast does your car really get off the line? The 0-60 Calculator estimates your 0-60 mph time from just two numbers: horsepower and vehicle weight. It also shows your 0-100 km/h time, power-to-weight ratio, quarter-mile ET and trap speed, average g-force, and a performance tier, so you can see exactly where your car sits. Pick your drivetrain for a launch-adjusted estimate, then use the Compare tab to see how more horsepower changes the result at the same weight.
Please enter horsepower above 0 and vehicle weight above 0.
| Horsepower | 0-60 mph | 0-100 km/h | 1/4-Mile ET | Trap Speed |
|---|
Times use the vehicle weight and drivetrain you entered above.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
A 0-60 calculator estimates how many seconds a vehicle takes to accelerate from a standstill to 60 mph. The 0-60 time is the most quoted acceleration figure in the car world: manufacturers publish it, reviewers test it, and buyers compare it. It is a quick way to judge how a car feels in everyday driving, from pulling away at a light to merging onto a highway.
This calculator works from power-to-weight ratio, the single biggest factor in straight-line acceleration. It uses an empirical formula fitted to real production cars, then adjusts for drivetrain, because how a car puts power down off the line matters as much as how much power it has. Alongside the 0-60 estimate it also gives a 0-100 km/h time, a quarter-mile ET and trap speed estimate, average g-force, and a performance tier, so one set of inputs answers several questions at once.
Every result is an estimate, not a tested time. Gearing, tires, road surface, weather, altitude, and driver skill all move the real number by a few tenths of a second. Use the calculator to compare cars and modifications, not to predict an exact drag-strip pass.
The 0-60 estimate uses an empirical power-law regression fitted to a panel of real production cars, from economy sedans to supercars:
t(0-60) = 0.706 x (W / HP)^0.823 x drivetrain factor
Where W is vehicle weight in pounds, HP is rated crank horsepower, and the drivetrain factor accounts for launch traction:
The 0-100 km/h time scales from the 0-60 time using the constant-power relation (time grows with the square of speed), since 100 km/h equals 62.1371 mph:
t(0-100) = t(0-60) x (62.1371 / 60)^2, about t(0-60) x 1.0725
The quarter-mile figures use Huntington’s classic drag-racing formulas, fitted to street cars:
ET = 6.290 x (W / HP)^(1/3)
Trap speed = 224 x (HP / W)^(1/3)
Average acceleration over the 0-60 run:
g = 2.73 / t(0-60)
The constant 2.73 comes from 60 mph in metres per second (26.8224) divided by gravity (9.81 m/s^2). Power-to-weight is shown two ways: pounds per horsepower (W / HP) and horsepower per ton (HP / (W / 2000)).
Take a sports sedan with 300 hp and a weight of 3,500 lb, rear-wheel drive.
So the car is estimated at 5.33 seconds to 60 mph, in the “Hot hatch / sport sedan” tier, with a mid-14-second quarter mile at just under 99 mph.
Across the production cars used to fit the regression, predictions land within about a quarter of a second of the published 0-60 time on average. Individual cars vary by several tenths because gearing, tire compound, surface, launch technique, temperature, and altitude are not in the formula. Treat the number as a ballpark for comparison, not a tested result.
Enter crank horsepower, the rated figure manufacturers publish. The formula was fitted against crank power. Wheel horsepower from a chassis dyno is roughly 10 to 15 percent lower after drivetrain losses, so entering it would make the estimate slower than reality.
Two cars with the same power-to-weight can post different 0-60 times because of launch traction. Front-wheel drive tends to spin or lose grip at launch and reads slightly slower (factor 1.04). All-wheel drive hooks up harder (0.95), and electric AWD adds instant torque from a standstill (0.86). Rear-wheel drive is the baseline at 1.00.
Use the ready-to-drive weight: curb weight plus a driver and fuel. Dry weight or payload figures will understate the mass the engine actually has to move and make the estimate too quick. If you are comparing a modification, keep the same weight basis for every run.
Acceleration follows a power law, not a straight line. In this formula time scales with (W / HP)^0.823, and in the quarter-mile formulas with a cube root, so each extra horsepower buys less than the last. Traction also caps the gain: below about 3 seconds the tires, not the engine, set the time.
All results are estimates based on empirical formulas fitted to production cars. They are for comparison and educational use only and are not a guarantee of any measured 0-60 time, quarter-mile time, or trap speed. Real performance depends on gearing, tires, road surface, weather, altitude, vehicle condition, and driver skill. Always obey speed limits and local laws, and only test acceleration in safe, legal settings such as a closed course or drag strip.
ADVERTISEMENT
ADVERTISEMENT