Adding a turbocharger or supercharger is one of the fastest ways to raise an engine’s output, but how much power will a given amount of boost actually add? This Boost Horsepower Calculator estimates your engine’s boosted horsepower from three numbers you already know: your naturally aspirated baseline, your planned boost pressure in psi, and your setup’s boost efficiency. It also shows the pressure ratio, the theoretical gain, and the realistic gain after losses, plus a comparison table across 4 to 12 psi so you can pick a boost level with confidence.
Please enter a naturally aspirated horsepower above 0, a boost pressure of 0 or more, an efficiency between 1 and 100, and an atmospheric pressure above 0.
| Boost (psi) | Pressure Ratio | HP Gain | Boosted HP | Power Increase |
|---|
All rows use the naturally aspirated horsepower, boost efficiency, and atmospheric pressure you entered above.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
A Boost Horsepower Calculator estimates how much horsepower an engine makes once a turbocharger or supercharger forces extra air into it. Power scales with the mass of air the engine can burn, so raising intake pressure above atmospheric pressure raises power in roughly the same proportion. The calculator starts from your engine’s naturally aspirated (NA) horsepower, works out the boost pressure ratio, and applies an efficiency factor to allow for the heat and losses that keep real gains below the textbook figure.
It works for both turbochargers and superchargers, since both do the same job: they raise manifold pressure above atmospheric. If you do not yet know your engine’s NA baseline, the Engine Horsepower Calculator can estimate it from torque and RPM or from quarter mile data.
The calculator uses the standard pressure ratio method, with the efficiency factor applied to the gain only (the baseline power is already real, measured power, so it is not discounted).
Pressure Ratio = (Atmospheric Pressure + Boost Pressure) / Atmospheric Pressure
Theoretical HP Gain = NA Horsepower x (Pressure Ratio – 1)
Effective HP Gain = Theoretical HP Gain x (Boost Efficiency / 100)
Boosted Horsepower = NA Horsepower + Effective HP Gain
Power Increase (%) = (Effective HP Gain / NA Horsepower) x 100
Atmospheric pressure is 14.7 psi at sea level. Each psi of boost is worth about 1/14.7, or roughly 6.8%, of the NA baseline at 100% efficiency, and proportionally less at lower efficiency.
A 300 hp naturally aspirated engine is fitted with a turbo running 8 psi of boost at 75% efficiency, at sea level (14.7 psi atmospheric pressure).
The engine is estimated to make 422.45 hp, a gain of 122.45 hp over its 300 hp baseline.
About 1/14.7 of your NA baseline per psi, which is roughly 6.8%, before efficiency losses. At the default 75% efficiency, each psi adds about 5.1% of baseline power. On a 300 hp engine that is about 15.31 hp per psi at 75% efficiency, or about 20.41 hp per psi at 100% efficiency.
Use 68 to 76% for a good turbocharger, 50 to 65% for a typical Roots blower, and 100% only if you want the theoretical maximum with no losses. The default of 75% is a sensible middle value for an efficient intercooled turbo setup. If your setup is non-intercooled, has a restrictive intake, or is not retuned for boost, enter a lower figure.
Yes. Both raise manifold pressure, and the pressure ratio maths is the same. The difference is that a supercharger is belt driven off the crankshaft, so it consumes roughly 10 to 15% of the power it generates to drive itself, while a turbo recovers energy from the exhaust. To allow for that parasitic loss, supercharger users should enter a lower efficiency than turbo users with an otherwise identical setup.
The calculator is a pressure ratio estimate, not a dyno. Real gains are typically 80 to 90% of the theoretical figure because compressing air heats it (hot air is less dense), ignition timing is often retarded to avoid knock, exhaust backpressure rises, and fuel delivery can become the limit. If your dyno result is well below the estimate, check intake temperatures, intercooler effectiveness, fueling and timing first.
Yes. Boost gauges read pressure above the local atmosphere, so the same 8 psi is a bigger pressure ratio at altitude, where the air is thinner. Change the atmospheric pressure input to match your elevation, for example about 12.23 psi at 5,000 feet or about 10.11 psi at 10,000 feet. Note that your NA baseline also drops with altitude, so enter the baseline measured at the same elevation for the most accurate result.
This calculator provides an estimate based on the pressure ratio method and the efficiency you enter. It is not a substitute for a dyno test, a professional tune, or engineering advice. Real power depends on intake temperature, intercooling, fuel quality, ignition timing, exhaust backpressure, engine condition and altitude. Higher boost increases cylinder pressure and heat, and can damage an engine that is not built or tuned for it. Always confirm fuel delivery, cooling and engine strength with a qualified tuner before running a new boost level.
ADVERTISEMENT
ADVERTISEMENT