Bowl Segment Calculator

A bowl, a dome and a dished tank end are all the same shape in geometry: a spherical cap, the piece cut off a sphere by a single flat plane. This free bowl segment calculator works out everything that matters about that shape from two measurements.

Bowl Dimensions

Enter the radius of the sphere the bowl was cut from and the depth of the bowl segment, both in inches. The segment height must be greater than 0 and no more than twice the sphere radius: at h = 2R the bowl is a full sphere, and at h = R it is a hemisphere. The gallon figure uses the US gallon, defined as exactly 231 cubic inches.

Sphere center R = 10.00 in h = 4.00 in a = 8.00 in Bowl cross-section (not to scale)

The labels update as you change the radius and height.

Bowl geometry
Base radius a (rim radius)
Rim diameter
Curved surface area
Bowl volume
Volume
Volume in US gallons
Note: the base radius is the radius of the circular rim where the bowl was cut from the sphere, and it is always smaller than the sphere radius except at h = R, where the bowl is a hemisphere and the rim radius equals R. The curved surface area is the inside of the bowl only, not the flat rim circle. The gallon figure divides the cubic inches by 231, the exact number of cubic inches in one US gallon.
Segment Height h (in)Base Radius a (in)Volume (cu in)Volume (US gal)Curved Surface Area (sq in)

Each row uses the sphere radius entered above, at a different segment height. A deeper bowl holds much more than a shallow one: doubling the height more than doubles the volume, because the volume grows with the square of the height.

Powered by Techraxy

Creator & Reviewer

Faiq Ur Rahman

Founder & CEO, Techraxy

Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.

Share:

Rate this Tool

User Ratings:

0
0 out of 5 stars (based on 0 reviews)
Excellent
Very good
Average
Poor
Terrible

ADVERTISEMENT

ADVERTISEMENT

A bowl, a dome and a dished tank end are all the same shape in geometry: a spherical cap, the piece cut off a sphere by a single flat plane. This free bowl segment calculator works out everything that matters about that shape from two measurements. Enter the radius of the sphere the bowl was cut from and the depth of the segment, and it gives the volume in cubic inches and US gallons, the radius of the circular rim, the rim diameter and the curved surface area, with a labelled cross-section diagram that updates as you type.

What is a Bowl Segment Calculator?

A bowl segment calculator works out the geometry of a spherical cap from its sphere radius R and its segment height h. The segment height is the depth of the bowl, measured from the rim plane down to the bottom of the bowl. The sphere radius is the radius of the full sphere the bowl was cut from, which is not the same as the radius of the rim: a shallow bowl cut from a large sphere has a rim radius much smaller than the sphere radius, and the two only match when the bowl is exactly a hemisphere.

The three lengths are tied together by the base radius formula. The rim radius a comes from a right triangle formed by the sphere center, the center of the rim circle and any point on the rim, which gives a = sqrt(h x (2R – h)). The volume follows from the sphere radius and the height: V = pi x h squared x (3R – h) / 3. The curved surface area, the inside of the bowl, is 2 x pi x R x h, a result that goes back to Archimedes and depends only on the sphere radius and the height, not on the rim radius.

Bowl segments show up wherever a curved vessel or a domed shape needs measuring: mixing bowls, bird baths, fire bowls, hemispherical planters, dished ends on pressure vessels and the domed roof of a tank. If the vessel is a straight-sided tank rather than a curved bowl, the Tank Volume Calculator covers cylinders and rectangular tanks, and for open water the Pool Calculator and the Pond Calculator work out the volume of a pool or a pond from its own dimensions.

How to Use the Bowl Segment Calculator

  1. Enter the sphere radius R in inches. This is the radius of the full sphere the bowl was cut from, not the radius of the rim.
  2. Enter the segment height h in inches, the depth of the bowl from the rim down to the bottom. It must be greater than 0 and no more than twice the sphere radius.
  3. Click Calculate, or just type: the results update as you enter the numbers, and the cross-section diagram updates as the inputs change.
  4. Read the Summary tab for the base radius, the rim diameter, the curved surface area, the volume in cubic inches and the volume in US gallons.
  5. Open the Compare Heights tab to see how the volume, rim radius and surface area change when the same sphere radius is cut at segment heights of 2, 4, 6 and 8 inches.

Bowl Segment Calculator Formula

Base radius a (in) = sqrt(h x (2R – h))

Rim diameter (in) = 2a

Volume (cu in) = pi x h squared x (3R – h) / 3

Volume (US gal) = volume in cubic inches / 231

Curved surface area (sq in) = 2 x pi x R x h

The constraint is 0 < h <= 2R. At h = R the bowl is a hemisphere, with a rim radius equal to R and a volume of (2/3) x pi x R cubed. At h = 2R the segment is the full sphere, the rim radius collapses to zero and the volume is (4/3) x pi x R cubed. The gallon conversion uses the US gallon, legally defined as exactly 231 cubic inches. The curved surface area is the inside of the bowl only; adding the flat rim circle, pi x a squared, gives the total surface area of the solid cap.

Worked Example

A bowl cut from a sphere of radius 10 inches, with a segment height of 4 inches. All steps below use the unrounded values; displayed figures are rounded to two decimals.

Base radius a = sqrt(4 x (20 – 4)) = sqrt(64) = 8.00 in.

Rim diameter = 2 x 8 = 16.00 in.

Volume = pi x 16 x (30 – 4) / 3 = pi x 16 x 26 / 3 = 435.6342, displayed as 435.63 cu in.

Volume in gallons = 435.6342 / 231 = 1.8859, displayed as 1.89 US gal.

Curved surface area = 2 x pi x 10 x 4 = 251.3274, displayed as 251.33 sq in.

So the bowl holds 435.63 cubic inches, or 1.89 US gallons, with a rim 16 inches across. As a cross-check, the same R = 10, h = 4 example in an independent worked example gives a volume of 435.6342 cubic inches and a curved surface area of 251.3274 square inches, matching this calculator exactly, and at h = R = 10 the calculator returns the hemisphere volume of 2,094.40 cubic inches.

Benefits of Using a Bowl Segment Calculator

  • Gives the volume two ways: cubic inches for the geometry and US gallons for filling, so a bowl, bird bath or fire bowl can be sized against a water supply.
  • Separates the three radii clearly: the sphere radius you enter, the rim radius the calculator finds, and the rim diameter, so the common mix-up between the sphere radius and the rim radius is avoided.
  • Shows the curved surface area: the inside area of the bowl, useful for coating, lining or heat transfer estimates.
  • Compares depths side by side: the Compare Heights tab shows how much more a deeper bowl holds at the same sphere radius.
  • Works from two measurements only: the sphere radius and the depth, with no need to measure the rim.
  • Free and instant: no sign-up, no download, and the results and the diagram update as you type.

Frequently Asked Questions

What is the difference between the sphere radius and the base radius?

The sphere radius R is the radius of the full sphere the bowl was cut from, and the base radius a is the radius of the circular rim where the cutting plane met the sphere. They are different numbers for every bowl except a hemisphere. For a shallow bowl the sphere radius is much larger than the rim radius: a bowl with R = 10 inches and a depth of 4 inches has a rim radius of only 8 inches. Confusing the two is the most common mistake with bowl geometry, which is why the calculator asks for R and works out a.

How many gallons does my bowl hold?

Divide the volume in cubic inches by 231, which is exactly how many cubic inches make one US gallon. This calculator does that for you and shows both figures. Note that the imperial gallon is a different unit at about 277.42 cubic inches, so a bowl holding 1.89 US gallons holds about 1.57 imperial gallons. If you are working outside the United States, use the cubic inches figure and divide by 277.42 instead.

What happens when the segment height equals the sphere radius?

The bowl becomes a hemisphere, exactly half a sphere. The rim radius equals the sphere radius, the rim is a great circle of the sphere, and the volume is (2/3) x pi x R cubed. For a sphere radius of 10 inches that is 2,094.40 cubic inches, or 9.07 US gallons. The curved surface area is half the surface area of the full sphere, 2 x pi x R squared.

Can the segment height be more than the sphere radius?

Yes, up to twice the sphere radius. A segment taller than R is more than a hemisphere: a deep bowl whose rim is narrower than its widest point. As the height grows past R, the rim radius shrinks again, reaching zero at h = 2R, where the segment is the whole sphere. The calculator accepts any height up to 2R and shows an error if the height goes past that, because no such segment exists.

Why is the curved surface area not the total surface area?

Because the curved surface area, 2 x pi x R x h, counts only the curved inside of the bowl, not the flat circular opening at the rim. The total surface area of the solid cap adds the flat base circle, pi x a squared, giving 2 x pi x R x h + pi x a squared. For the worked example that is 251.33 + 201.06 = 452.39 square inches. The calculator shows the curved area because that is the figure needed for lining or coating the inside of a bowl.

Disclaimer

This calculator computes spherical cap geometry from the dimensions you enter, using the standard formulas for the volume, base radius and curved surface area of a spherical cap. It assumes the bowl is a true segment of a sphere with a perfectly circular rim and a smooth curved wall; real bowls with a flat bottom, a rolled rim or a thick wall will hold slightly less than the calculated volume, and the wall thickness is not accounted for. The gallon figure is in US gallons, defined as exactly 231 cubic inches. For pressure vessels, dished tank ends and any safety-critical work, confirm the dimensions against the applicable standard and the manufacturer’s data rather than relying on a calculator alone.

ADVERTISEMENT

ADVERTISEMENT