A flange, a wheel hub or a bolted cover plate needs its holes in exactly the right places, and working out each hole position by hand from a bolt circle diameter is slow and error prone. This free bolt circle calculator does the layout for you.
Enter the bolt circle diameter (also called the pitch circle diameter, PCD) in millimetres, the number of evenly spaced holes, and the angle of hole 1 measured counter-clockwise from the positive X axis (3 o'clock). Holes are numbered counter-clockwise from hole 1, and coordinates are measured from the bolt circle centre.
Please enter a bolt circle diameter above 0 and a whole number of holes from 2 to 60.
| Hole | Angle (deg) | X (mm) | Y (mm) |
|---|
| Number of Holes | Angular Spacing (deg) | Adjacent-Hole Chord (mm) | Arc Pitch (mm) |
|---|
Each row uses the bolt circle diameter entered above, at a different hole count. More holes means tighter angular spacing and a shorter chord between neighbours, while the radius stays the same.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
A flange, a wheel hub or a bolted cover plate needs its holes in exactly the right places, and working out each hole position by hand from a bolt circle diameter is slow and error prone. This free bolt circle calculator does the layout for you. Enter the bolt circle diameter, the number of holes and the angle of the first hole, and it gives the bolt circle radius, the angular spacing, the chord distance between adjacent holes, and the X and Y coordinate of every hole measured from the centre, ready to enter in a DRO, a CAD drawing or a CNC program.
A bolt circle calculator works out the geometry of a ring of evenly spaced holes from the bolt circle diameter and the hole count. The bolt circle, also called the bolt circle diameter (BCD) or pitch circle diameter (PCD), is the imaginary circle that passes through the centre of every bolt hole in the pattern. Together, the diameter and the hole count fully define the pattern: the radius is half the diameter, the angular spacing is 360 degrees divided by the hole count, and each hole sits at its own angle around the circle, measured counter-clockwise from the positive X axis (3 o’clock).
Each hole coordinate comes from the parametric form of the circle: x = r cos(theta) and y = r sin(theta), where r is the bolt circle radius and theta is the hole angle. Hole 1 sits at the offset angle you choose, and each following hole is one angular spacing further counter-clockwise. The chord, the straight-line distance between the centres of two neighbouring holes, is 2r sin(pi/n), which is the same as the diameter times sin(180/n). For a 6-hole pattern the chord equals the radius exactly, which is the old layout trick of walking a divider set to the radius around the circle.
Bolt circles show up wherever a ring of fasteners holds parts together: pipe flanges, wheel hubs (the 5×120 wheel pattern is a 5-hole bolt circle on a 120 mm diameter), coupling hubs, bearing housings and cover plates. Once the holes are laid out, the size of each hole itself depends on the bolt: use the Clearance Hole Calculator to find the right clearance drill size for the bolt, and the Bolt Torque Calculator to work out how tight each bolt should be.
Bolt circle radius (mm) = bolt circle diameter / 2
Angular spacing (degrees) = 360 / number of holes
Angle of hole i (degrees) = offset angle + (i – 1) x angular spacing, for i = 1 to n
X coordinate of hole i (mm) = radius x cos(angle of hole i)
Y coordinate of hole i (mm) = radius x sin(angle of hole i)
Adjacent-hole chord (mm) = 2 x radius x sin(pi / number of holes) = diameter x sin(180 / number of holes)
Arc pitch (mm) = pi x diameter / number of holes
Bolt circle circumference (mm) = pi x diameter
The chord formula is the Machinery’s Handbook chordal factor rule: the chord is the diameter times sin(180/n). Five holes on any circle are 0.58779 times the diameter apart, and eight holes are 0.38268 times the diameter apart.
A 6-hole flange pattern on a bolt circle diameter of 100 mm, with hole 1 at 0 degrees. All steps below use the unrounded values; displayed figures are rounded to two decimals.
Bolt circle radius = 100 / 2 = 50.00 mm.
Angular spacing = 360 / 6 = 60.00 deg.
Adjacent-hole chord = 2 x 50 x sin(180 / 6) = 100 x sin(30 deg) = 100 x 0.5 = 50.00 mm.
Arc pitch = pi x 100 / 6 = 52.36 mm.
Bolt circle circumference = pi x 100 = 314.16 mm.
Hole coordinates, from x = 50 cos(theta) and y = 50 sin(theta):
Hole 1 at 0 deg: (50.00, 0.00).
Hole 2 at 60 deg: (25.00, 43.30).
Hole 3 at 120 deg: (-25.00, 43.30).
Hole 4 at 180 deg: (-50.00, 0.00).
Hole 5 at 240 deg: (-25.00, -43.30).
Hole 6 at 300 deg: (25.00, -43.30).
So the six holes sit 60 degrees apart and 50 mm from their neighbours, exactly one radius apart. As a cross-check, a 5-hole pattern on a 120 mm bolt circle with a 30 degree offset gives a chord of 70.53 mm (2 x 60 x sin(36 deg)), and hole 1 at (51.96, 30.00), which matches the same formulas applied independently.
The bolt circle diameter, BCD or PCD, is the diameter of the imaginary circle that passes through the centre of every bolt hole in a ring pattern. It is not the diameter of the flange or plate, and it is not the hole size. A wheel described as 5×120 has 5 holes on a 120 mm bolt circle diameter. Together with the hole count, the bolt circle diameter fully defines the pattern geometry.
Each hole sits at an angle around the circle, and its coordinates are x = r cos(theta) and y = r sin(theta), where r is half the bolt circle diameter. Hole 1 sits at the offset angle you choose, and each following hole is 360/n degrees further counter-clockwise. For a 6-hole pattern on a 100 mm bolt circle with no offset, hole 1 is at (50.00, 0.00) and hole 2 is at (25.00, 43.30). This calculator produces the full table, so no hand trigonometry is needed.
The chord is the straight-line distance between the centres of two neighbouring holes, measured across the circle, and it equals 2r sin(pi/n). The arc pitch is the distance between the same two holes measured along the curve of the bolt circle, pi times the diameter divided by n. The chord is always slightly shorter than the arc pitch, and it is the figure a caliper can check directly on the finished part.
Because sin(180/6) is sin(30 degrees), which is exactly 0.5, so the chord is the diameter times 0.5, which is the radius. Machinists have used this for over a century: set a divider to the bolt circle radius and walk it around the circle to step off six evenly spaced holes. It only works for six holes; a 5-hole pattern has a chord of 0.58779 times the diameter, and an 8-hole pattern 0.38268 times the diameter.
Measure the centre-to-centre distance between two adjacent holes (the chord) with a caliper, count the holes, and use BCD = chord / sin(180/n). For example, five holes with 70 mm between neighbours gives 70 / sin(36 deg) = 119.1 mm, which points to the common 5×120 wheel pattern. For the hole size itself, the Clearance Hole Calculator gives the right drill size for the bolt you plan to use.
This calculator computes bolt circle geometry from the dimensions you enter, using the standard parametric circle formulas and the Machinery’s Handbook chord rule. Coordinates are measured from the bolt circle centre, so add your part zero offset before using them in a machine program, and confirm hole positions against the engineering drawing before drilling. Hole sizes, bolt grades and tightening torques are separate decisions: check the clearance hole size and the bolt torque for your fastener rather than relying on the pattern geometry alone.
ADVERTISEMENT
ADVERTISEMENT