Where two road grades meet, the road cannot simply kink from one slope to the next: a vertical curve smooths the change so drivers keep sight distance and a comfortable ride. This free vertical curve calculator works out the geometry of that curve from the two grades and the curve length or K value.
Enter the grades in percent, with a plus sign for uphill and a minus sign for downhill. Enter the PVC station in feet (1000 ft displays as station 10+00.00). This is an equal-tangent parabolic curve: the PVI sits at the midpoint, L/2 from the PVC. The spot distance x gives the curve elevation at any point you choose between the PVC and the PVT.
Please check the inputs: the grades must differ, the curve length or K value must be above 0, and the spot distance must lie between the PVC and the PVT.
| Curve Length L (ft) | K (ft per %) | PVI Elevation (ft) | PVT Elevation (ft) | High/Low Point Station | High/Low Elevation (ft) |
|---|
Each row uses the grades and PVC entered above, at a different curve length. A longer curve raises the K value and stretches the same grade change over more distance, so the curve is gentler and the turning point moves further from the PVC.
Founder & CEO, Techraxy
Faiq Ur Rahman is a web designer, digital product developer, and Founder of Techraxy, a growing platform of online calculators and utility tools. He specializes in building structured, user-friendly tools focused on finance, health, conversions, productivity, and everyday problem-solving. He is passionate about developing practical digital solutions that make complex tasks simpler for users worldwide.
User Ratings:
ADVERTISEMENT
ADVERTISEMENT
Where two road grades meet, the road cannot simply kink from one slope to the next: a vertical curve smooths the change so drivers keep sight distance and a comfortable ride. This free vertical curve calculator works out the geometry of that curve from the two grades and the curve length or K value. Enter the incoming and outgoing grades, the curve length or K, and the PVC station and elevation, and it gives the grade difference, the K value, the PVC, PVI and PVT stations and elevations, the midpoint elevation, the high or low point, and the elevation at any spot distance you choose.
A vertical curve calculator solves the geometry of a parabolic vertical curve, the standard way of joining two grades on a road or railway. The incoming grade g1 and the outgoing grade g2 meet at the PVI (Point of Vertical Intersection). The curve itself starts at the PVC (Point of Vertical Curvature), half a curve length before the PVI, and ends at the PVT (Point of Vertical Tangency), half a curve length after it. The curve is an equal-tangent parabola: the grade changes at a constant rate along its length, which is what makes the ride smooth and the sight distance predictable.
The key numbers are the algebraic grade difference A = g2 – g1, in percent, and the rate of curvature K = L / |A|, the curve length in feet per 1% change in grade. A negative A means the road goes from uphill to downhill, a crest curve; a positive A means it goes from downhill to uphill, a sag curve. The elevation at any distance x from the PVC follows the parabola y = elev_PVC + (g1/100)x + (A/(200L))x^2, and the high or low point, where the grade is zero, sits at x = -g1 x L / A from the PVC, when that point falls inside the curve. The Elevation Grade Calculator is a related tool for working out a single grade from a rise and a run.
Algebraic grade difference (%) = A = g2 – g1 (signed; negative is a crest curve, positive is a sag curve)
Rate of curvature (ft per %) = K = L / |A|
Curve length from K (ft) = L = K x |A|
PVI station = PVC station + L/2
PVI elevation (ft) = PVC elevation + (g1/100) x (L/2)
PVT station = PVC station + L
PVT elevation (ft) = PVI elevation + (g2/100) x (L/2)
Elevation at distance x from PVC (ft) = PVC elevation + (g1/100)x + (A/(200L))x^2
High/low point distance from PVC (ft) = x = -g1 x L / A, valid only when 0 <= x <= L
Midpoint elevation (ft) = elevation at x = L/2
Grades enter the formulas as decimals (percent divided by 100), and x and L are both in feet, so the units stay consistent throughout.
A crest curve with incoming grade +2%, outgoing grade -1%, curve length 400 ft, PVC station 10+00 (1000 ft) and PVC elevation 100.00 ft. All steps below use the unrounded values; displayed figures are rounded to two decimals.
Grade difference A = -1 – 2 = -3.00%, so the curve is a crest curve.
K value = 400 / 3 = 133.33 ft per %.
PVI station = 1000 + 200 = 1200 ft, station 12+00.00.
PVI elevation = 100 + 0.02 x 200 = 104.00 ft.
PVT station = 1000 + 400 = 1400 ft, station 14+00.00.
PVT elevation = 104 + (-0.01) x 200 = 102.00 ft.
Midpoint elevation at x = 200 ft: 100 + 0.02 x 200 + (-3/(200 x 400)) x 200^2 = 100 + 4 – 1.5 = 102.50 ft.
High point distance from PVC: x = -0.02 x 400 / (-0.03) = 266.67 ft, station 12+66.67.
High point elevation: 100 + 0.02 x 266.67 + (-0.03/(2 x 400)) x 266.67^2 = 100 + 5.3333 – 2.6667 = 102.67 ft.
So the curve rises from 100.00 ft at the PVC to a high point of 102.67 ft at station 12+66.67, then falls to 102.00 ft at the PVT.
The K value is the rate of vertical curvature: the length of curve in feet needed for each 1% change in grade, K = L / |A|. A 400 ft curve across a 3% grade change has K = 133.33 ft per %. Design standards set minimum K values for a given design speed and sight distance, so a larger K means a longer, gentler curve that is safer at speed.
A crest curve has a negative algebraic grade difference (A = g2 – g1 is less than zero): the road goes from uphill to downhill and the curve has a high point. A sag curve has a positive A: the road goes from downhill to uphill and the curve has a low point. Crest curves are governed by stopping sight distance over the top of the hill; sag curves are governed by headlight sight distance at night, comfort and drainage at the low point.
When both grades point the same way. The turning point sits at x = -g1 x L / A from the PVC, and it only falls inside the curve when the grades have opposite signs (or one grade is zero, putting the turning point at an end). If both grades are uphill, the curve rises all the way from PVC to PVT; if both are downhill, it falls all the way. The calculator reports “No high point within the curve” or “No low point within the curve” in that case.
A station is a distance along the alignment in hundreds of feet. Station 12+66.67 means 12 full 100 ft stations plus 66.67 ft, or 1,266.67 ft from the project origin. Station 10+00.00 is 1,000 ft, and station 0+00.00 is the origin itself. Enter stations into this calculator in plain feet (1266.67) and it displays them in station format.
Yes. Choose “Enter K value” in the Curve Length Input dropdown, enter K in feet per % grade, and the calculator finds L = K x |A| from the grades you entered. This is the usual design direction: pick a K that meets the sight distance requirement for the design speed, then find the curve length it implies. Switching back to “Enter curve length L directly” restores the L input.
This calculator solves equal-tangent parabolic vertical curves from the grades and curve length you enter, using the standard highway geometry formulas. It does not check stopping sight distance, headlight sight distance, drainage, design speed or any AASHTO or local standard, and it does not cover unequal-tangent curves. Minimum K values depend on design speed and sight distance requirements that vary by jurisdiction. For road design, grading plans or any safety-critical work, have the alignment checked by a licensed civil engineer against the applicable design standard rather than relying on a calculator alone.
ADVERTISEMENT
ADVERTISEMENT